Skip to main content
Safety Dialogue

Safety Helmet Best Brand in Pakistan

By January 5, 2020No Comments

Safety helmets comply with standard DIN EN 397, it is stated that safety helmet should be manufactured/designed to safeguard the wearer from falling things. Strong protection must be there against mechanical impacts to the head of the user against possible consequences such as brain injuries or skull fractures.

3M Hard Hat, White, Lightweight, Adjustable 4-Point Ratchet, H-701R

What is OSHA & ANSI

hard hat that meets ANSI Z89.1 is OSHA compliant. 29 CFR 1910.135(b)(1) and 29 CFR 1926.100(b)(1) state that head protection must meet the 1997, 2003, or 2009 editions of ANSI Z89.1, or be shown to offer equivalent or better protection.

MSA-475358 White V-Gard Polyethylene Cap Style Hard Hat With 4 Point RatchetRatchet Suspension

OSHA requires, in 29 CFR 1910.135, that if the following hazardous conditions are present, then head protection is required: … There is potential for employees to bump their heads against fixed objects, such as exposed pipes or beams. There is a possibility of accidental head contact with electrical hazards.

Section 1926.100 (Head protection) states:

(a) Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets

ANSI Z89.1-2014

ANSI/ISEA Z89.1-2014 was prepared by the members of ISEA’s Head Protection Group as a revision to ANSI Z89.1-2009, and approved by a consensus review panel of users, government agencies and safety experts setting forth requirements for hard hats of type I or type II – and marking requirements for all protective head gear classified as a hard hat.

Hard Hat Tests

ANSI published a revision in January of 2009. The significant changes from the 2003 version are three non-mandatory tests and are easy to understand. Each of these tests, if elected to be tested by the manufacturer, will result in three new markings on the helmet.

JSP 280-EV6151M-20 Evolution 6151 Deluxe Mining Hard Hat

The three optional test criteria are:

  1. Reverse Donning: Helmets marked with a “reverse donning arrow” can be worn frontward or backward in accordance with the manufacturer’s wearing instructions. They pass all testing requirements, whether worn frontward or backward.
  2. Lower Temperature: Helmets marked with an “LT” indicates that the hard hat meets all testing requirements of the standard when preconditioned at a temperature of -30°C (-22°F).
  3. High Visibility: Helmets marked with an “HV” indicates that the hard hat meets all testing requirements of the standard for high visibility colors. This includes tests for chromaticity and luminescence.

When to Wear a Hard Hat

The Occupational Safety and Health Administration (OSHA) guidelines for head protection are referenced in 29 Code of Federal Regulations (CFR) 1910.135 and 1926.100.

29 CFR 1910.135(a)(1) states, “Each affected employee shall wear protective helmets when working in areas where there is a potential for injury to the head from falling objects.” The standard also addresses situations in which electrical hazards are present.

1901.135(a)(2) requires that workers who perform tasks close to exposed electrical conductors should wear hard hats engineered to shield against shocks. The OSHA standards themselves do not identify specific occupations or applications where head protection is required; Appendix B to Subpart I Part 9 lists some examples.

Shelf life of helmet

As a general guide, industrial safety helmets should be replaced three years after manufacture, but always check with the manufacturer.

Why it important

Studies have shown that wearing a Safety helmet can diminish your risk of a serious brain injury and death because during a fall or collision, most of the impact energy is absorbed by the Safety helmet, rather than your head and brain. But just as important as wearing a Safety helmet is wearing the right MSA Safety helmet.

Color of helmet

Safety helmet color White is most common and used for managers, architects, engineers, foremen or supervisors

Safety helmet Color Blue used carpenters and other technical operators including electricians will normally wear blue hard hats,

Safety helmet Color Orange is worn by road crews.

Safety helmet Color Green often signifies a safety inspector but can also be used by new workers on the site or probationary staff.


Safety helmet (MSA/JSP) is a form of protective gear worn to protect the head. Definitely, a Safety helmet (MSA/JSP) complements the skull in protecting the human brain. Ceremonial or symbolic helmets (e.g. UK policeman’s helmet) without protective function are sometimes worn.

Different Safety helmet functions.

  1. The safety helmet should be rated to surpass industry safety standards.
  2. The helmet support mechanism is expanded and adjustable to decrease helmet movement.
  3. A set of removable earmuffs can be used easily to protect ears against unnecessary noise.
  4. A clear screen allows you to work on specific projects and protect flying objects.
  5. A mesh screen is available for those jobs where insects are an issue.

Types of best helmet.

  1. The Forestry Safety Helmet from TR Industrial.
  2. JORSTECH Ventilated Hard Hat
  3. Pyramex Ridgeline Full-Brim Hard Hat
  4. Ergodyne Safety Bump Cap
  5. 3M Secure Fit Safety Helmet
  6. Neiko Heavy-Duty Hard Hat
  7. Uninova Safety Hard Hat
  8. Oregon Chainsaw Safety Helmet
  9. NoCry Heavy Duty Hard Hat
  10. MSA V-Guard

MSA V-Gard hard hat known for comfort, quality and durability.

The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.

V-Gard Slotted Cap, White, W/Fas-Trac III Suspension (Specification)

Part Number: 475358,
Color: WHITE
Length: 10.197 IN (259.000 MM)
Width: 8.661 IN (220.000 MM)
Height: 7.559 IN (192.000 MM)
Weight: 0.833 LB (0.378 KG)
Approvals: ANSI Z89.1-2014
CSA Z94.1-2015

Impact absorption test
• A 5kg round striker is dropped onto the helmet from 1 meter
• The maximum transmitted force should not exceed 5kN
Penetration test
• A 3 kg pointed cone is dropped onto the helmet from 1 meter
• The striker should not make contact with the head form underneath the helmet
Chinstrap anchorage
• Initial 150 N applied, then increased 20 N/ min until failure
• Chinstrap anchorage should release at a minimum force of 150 and no more than 250 N
Flame test
• A burner pointing the flame at 45° to any point between 50 and 100 m from the crown, during
10 seconds
• No visible flame after 5 second

Hard Hat Expiration Date

All Safety hard hats are made with high quality, durable materials to protect laborers, but they will not last forever. Safety Hard hats are subject to working environment, sunlight exposure, extreme temperatures, and general wear and tear that can degrade the protective properties of the device over time.


  • AGV Safety Helmets.
  • BEON Safety Helmets.
  • ISTROM Safety Helmets.
  • GXT Safety Helmets.
  • ZEUS Safety Helmets.
  • Bell Safety Helmets.
MSA 475369 V-Gard Slotted Full-Brim Hard Hat, with 4-point Fas-Trac III Suspension, Standard, White


Leave a Reply